Philips SHP6000 Review

Philips SHP6000 Review

Soundsight Headphones is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

With a frequency response between 16 and 23 kHz, the SHP-6000 comes with 40 mm drivers that can give you fantastic bass experiences. The ear pads are designed so that adaptive adjustments can be made to the shape of the ears. That way, it can improve the steadiness and balanced pressure on an individual's ears and head to obtain premium listening quality, including distortion blockage and wearing comfort.

Even though the Philips SHP-6000 are praised for their quality, it should not be compared to Audio-Technica ATH-AVA300 models and Sennheiser HD 215 II, far more costly hi-fi models. The price of the headphone is justified with the built sound and quality. When using the 40mm drivers, the user will experience adequate mid-range and intense bass. The frequencies remain consistent, even at peak sound.

Philips SHP6000/10 Budget Hi-Fi Headphones Review

1. Overview - not finished

Type: Over-ear Noise Cancelling Headphones | Bluetooth: 4.0 | Battery: 30 Hours | Charging: 4 Hours | Drivers: Dynamic | Drivers-Size: 45 mm | Weight: 385g

Pros

Cons

Beyerdynamic Aventho Wireless On-Ear Headphones
Philips SHP6000/10 - Package Accessories Bundle | Source: Philips
3/5
3/5

The packaging of the Philips SHP-6000 headphones includes a cardboard. Inside are the headphones covered and secured in a bubblegum material to prevent any damage. It also contains a 3.5 mm and 6.3 mm jack plug adapter.

4/5
4/5

Philips introduced the novel SHP6000/10 headphones as a half-open model. Low sound frequencies can therefore leak to the outside, while high sound frequencies cannot. The term “natural bass reproduction” of the headphones refers to the comparison with closed headphones. The resulting sound feels excessively bass-heavy to a few users, while the soft sounds are also faint. One more benefit of the semi-open concept is that the ear cups are free from pressure even if used a lot. This experience in the closed systems is very displeasing at times.

The metal base of the headband is surrounded by soft artificial leather and then covered with plastic. The external part of the cups is connected to the headband, which provides fair sound insulation. Nonetheless, it is not recommended to use these headphones if you are in an urban environment or at the subway.

The letters ‘R’ and ‘L’ are engraved on the earcups to locate the signal output. It is also printed with the name of the company, which provides a trendy appearance. The coating may get dull or messy by scratches or fingerprints; therefore, it is suggested that you clean the headphones once a week with a wet cloth.

Multiple cells are used to make porous, tender floating cushions included as the ear cushions material. Along with artificial leather, this design helps you get comfortable in these headphones for many hours.

The headphones can connect to a sound source through a three-meter wide cable and three-and-a-half millimeter jack. A 6.5 mm gold-plated adapter is included by Philips. SHP-6000 is less concerned about the functionality and more about the sound; therefore, a microphone and volume control system is missing in the headphones.

The headphones fit tightly to the head; therefore, you might feel unpleasant when you wear them for the initial few weeks. The three-meter cord of the headphones is covered with a rubber-like material to prevent twisting so that you can take it with you anywhere. The initial two or three hours after wearing the headphones will be a pleasant experience as they will not slip if you move around; however, you might feel pressure on your ears after a few hours. When that happens, you can remove them for ten minutes or change their position.

4/5
4/5

The Philips SHP6000/10 semi-open headphones have a good sound quality that justifies its cost and is better than many competitors. It provides users with excellent bass, treble, and consistent midrange from its 40 mm neodymium drivers along the highest level of power input of 100 mW.

The headphones provide a diverse frequency consisting of 105 dB sensitivity, 32 Ohm, and 16 Hz to 23,000 Hz. Besides the technical values, Philips SHP6000/10 is one of the finest headphones for Television. An individual can also use the Philips headphones with MP3 players, iPods, PCs, and smartphones. It is preferred to use an amplifier if you wish to have high-quality sound at home.

The model’s sound reproduction does not concentrate on a particular frequency band. The sounds of the vocals, drums, or guitars do not overlap one another and play harmoniously. The headphones provide a satisfying experience of listening to diverse music genres such as hip hop and classical, which is what most headphones in the $50 price range don’t offer.

3.7/5
3.7/5

To conclude, Philips SHP6000/10 lacks high-quality sound, fair noise reduction, and a fashionable design. However, for the price (around $50), the model’s primary elements are justifiable.

Pros

Cons

Leave a Reply

Your email address will not be published. Required fields are marked *